Moving the Bitcoin Core Data Directory - Bitzuma

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Technical: The Path to Taproot Activation

Taproot! Everybody wants to have it, somebody wants to make it, nobody knows how to get it!
(If you are asking why everybody wants it, see: Technical: Taproot: Why Activate?)
(Pedants: I mostly elide over lockin times)
Briefly, Taproot is that neat new thing that gets us:
So yes, let's activate taproot!

The SegWit Wars

The biggest problem with activating Taproot is PTSD from the previous softfork, SegWit. Pieter Wuille, one of the authors of the current Taproot proposal, has consistently held the position that he will not discuss activation, and will accept whatever activation process is imposed on Taproot. Other developers have expressed similar opinions.
So what happened with SegWit activation that was so traumatic? SegWit used the BIP9 activation method. Let's dive into BIP9!

BIP9 Miner-Activated Soft Fork

Basically, BIP9 has a bunch of parameters:
Now there are other parameters (name, starttime) but they are not anywhere near as important as the above two.
A number that is not a parameter, is 95%. Basically, activation of a BIP9 softfork is considered as actually succeeding if at least 95% of blocks in the last 2 weeks had the specified bit in the nVersion set. If less than 95% had this bit set before the timeout, then the upgrade fails and never goes into the network. This is not a parameter: it is a constant defined by BIP9, and developers using BIP9 activation cannot change this.
So, first some simple questions and their answers:

The Great Battles of the SegWit Wars

SegWit not only fixed transaction malleability, it also created a practical softforkable blocksize increase that also rebalanced weights so that the cost of spending a UTXO is about the same as the cost of creating UTXOs (and spending UTXOs is "better" since it limits the size of the UTXO set that every fullnode has to maintain).
So SegWit was written, the activation was decided to be BIP9, and then.... miner signalling stalled at below 75%.
Thus were the Great SegWit Wars started.

BIP9 Feature Hostage

If you are a miner with at least 5% global hashpower, you can hold a BIP9-activated softfork hostage.
You might even secretly want the softfork to actually push through. But you might want to extract concession from the users and the developers. Like removing the halvening. Or raising or even removing the block size caps (which helps larger miners more than smaller miners, making it easier to become a bigger fish that eats all the smaller fishes). Or whatever.
With BIP9, you can hold the softfork hostage. You just hold out and refuse to signal. You tell everyone you will signal, if and only if certain concessions are given to you.
This ability by miners to hold a feature hostage was enabled because of the miner-exit allowed by the timeout on BIP9. Prior to that, miners were considered little more than expendable security guards, paid for the risk they take to secure the network, but not special in the grand scheme of Bitcoin.

Covert ASICBoost

ASICBoost was a novel way of optimizing SHA256 mining, by taking advantage of the structure of the 80-byte header that is hashed in order to perform proof-of-work. The details of ASICBoost are out-of-scope here but you can read about it elsewhere
Here is a short summary of the two types of ASICBoost, relevant to the activation discussion.
Now, "overt" means "obvious", while "covert" means hidden. Overt ASICBoost is obvious because nVersion bits that are not currently in use for BIP9 activations are usually 0 by default, so setting those bits to 1 makes it obvious that you are doing something weird (namely, Overt ASICBoost). Covert ASICBoost is non-obvious because the order of transactions in a block are up to the miner anyway, so the miner rearranging the transactions in order to get lower power consumption is not going to be detected.
Unfortunately, while Overt ASICBoost was compatible with SegWit, Covert ASICBoost was not. This is because, pre-SegWit, only the block header Merkle tree committed to the transaction ordering. However, with SegWit, another Merkle tree exists, which commits to transaction ordering as well. Covert ASICBoost would require more computation to manipulate two Merkle trees, obviating the power benefits of Covert ASICBoost anyway.
Now, miners want to use ASICBoost (indeed, about 60->70% of current miners probably use the Overt ASICBoost nowadays; if you have a Bitcoin fullnode running you will see the logs with lots of "60 of last 100 blocks had unexpected versions" which is exactly what you would see with the nVersion manipulation that Overt ASICBoost does). But remember: ASICBoost was, at around the time, a novel improvement. Not all miners had ASICBoost hardware. Those who did, did not want it known that they had ASICBoost hardware, and wanted to do Covert ASICBoost!
But Covert ASICBoost is incompatible with SegWit, because SegWit actually has two Merkle trees of transaction data, and Covert ASICBoost works by fudging around with transaction ordering in a block, and recomputing two Merkle Trees is more expensive than recomputing just one (and loses the ASICBoost advantage).
Of course, those miners that wanted Covert ASICBoost did not want to openly admit that they had ASICBoost hardware, they wanted to keep their advantage secret because miners are strongly competitive in a very tight market. And doing ASICBoost Covertly was just the ticket, but they could not work post-SegWit.
Fortunately, due to the BIP9 activation process, they could hold SegWit hostage while covertly taking advantage of Covert ASICBoost!

UASF: BIP148 and BIP8

When the incompatibility between Covert ASICBoost and SegWit was realized, still, activation of SegWit stalled, and miners were still not openly claiming that ASICBoost was related to non-activation of SegWit.
Eventually, a new proposal was created: BIP148. With this rule, 3 months before the end of the SegWit timeout, nodes would reject blocks that did not signal SegWit. Thus, 3 months before SegWit timeout, BIP148 would force activation of SegWit.
This proposal was not accepted by Bitcoin Core, due to the shortening of the timeout (it effectively times out 3 months before the initial SegWit timeout). Instead, a fork of Bitcoin Core was created which added the patch to comply with BIP148. This was claimed as a User Activated Soft Fork, UASF, since users could freely download the alternate fork rather than sticking with the developers of Bitcoin Core.
Now, BIP148 effectively is just a BIP9 activation, except at its (earlier) timeout, the new rules would be activated anyway (instead of the BIP9-mandated behavior that the upgrade is cancelled at the end of the timeout).
BIP148 was actually inspired by the BIP8 proposal (the link here is a historical version; BIP8 has been updated recently, precisely in preparation for Taproot activation). BIP8 is basically BIP9, but at the end of timeout, the softfork is activated anyway rather than cancelled.
This removed the ability of miners to hold the softfork hostage. At best, they can delay the activation, but not stop it entirely by holding out as in BIP9.
Of course, this implies risk that not all miners have upgraded before activation, leading to possible losses for SPV users, as well as again re-pressuring miners to signal activation, possibly without the miners actually upgrading their software to properly impose the new softfork rules.

BIP91, SegWit2X, and The Aftermath

BIP148 inspired countermeasures, possibly from the Covert ASiCBoost miners, possibly from concerned users who wanted to offer concessions to miners. To this day, the common name for BIP148 - UASF - remains an emotionally-charged rallying cry for parts of the Bitcoin community.
One of these was SegWit2X. This was brokered in a deal between some Bitcoin personalities at a conference in New York, and thus part of the so-called "New York Agreement" or NYA, another emotionally-charged acronym.
The text of the NYA was basically:
  1. Set up a new activation threshold at 80% signalled at bit 4 (vs bit 1 for SegWit).
    • When this 80% signalling was reached, miners would require that bit 1 for SegWit be signalled to achive the 95% activation needed for SegWit.
  2. If the bit 4 signalling reached 80%, increase the block weight limit from the SegWit 4000000 to the SegWit2X 8000000, 6 months after bit 1 activation.
The first item above was coded in BIP91.
Unfortunately, if you read the BIP91, independently of NYA, you might come to the conclusion that BIP91 was only about lowering the threshold to 80%. In particular, BIP91 never mentions anything about the second point above, it never mentions that bit 4 80% threshold would also signal for a later hardfork increase in weight limit.
Because of this, even though there are claims that NYA (SegWit2X) reached 80% dominance, a close reading of BIP91 shows that the 80% dominance was only for SegWit activation, without necessarily a later 2x capacity hardfork (SegWit2X).
This ambiguity of bit 4 (NYA says it includes a 2x capacity hardfork, BIP91 says it does not) has continued to be a thorn in blocksize debates later. Economically speaking, Bitcoin futures between SegWit and SegWit2X showed strong economic dominance in favor of SegWit (SegWit2X futures were traded at a fraction in value of SegWit futures: I personally made a tidy but small amount of money betting against SegWit2X in the futures market), so suggesting that NYA achieved 80% dominance even in mining is laughable, but the NYA text that ties bit 4 to SegWit2X still exists.
Historically, BIP91 triggered which caused SegWit to activate before the BIP148 shorter timeout. BIP148 proponents continue to hold this day that it was the BIP148 shorter timeout and no-compromises-activate-on-August-1 that made miners flock to BIP91 as a face-saving tactic that actually removed the second clause of NYA. NYA supporters keep pointing to the bit 4 text in the NYA and the historical activation of BIP91 as a failed promise by Bitcoin developers.

Taproot Activation Proposals

There are two primary proposals I can see for Taproot activation:
  1. BIP8.
  2. Modern Softfork Activation.
We have discussed BIP8: roughly, it has bit and timeout, if 95% of miners signal bit it activates, at the end of timeout it activates. (EDIT: BIP8 has had recent updates: at the end of timeout it can now activate or fail. For the most part, in the below text "BIP8", means BIP8-and-activate-at-timeout, and "BIP9" means BIP8-and-fail-at-timeout)
So let's take a look at Modern Softfork Activation!

Modern Softfork Activation

This is a more complex activation method, composed of BIP9 and BIP8 as supcomponents.
  1. First have a 12-month BIP9 (fail at timeout).
  2. If the above fails to activate, have a 6-month discussion period during which users and developers and miners discuss whether to continue to step 3.
  3. Have a 24-month BIP8 (activate at timeout).
The total above is 42 months, if you are counting: 3.5 years worst-case activation.
The logic here is that if there are no problems, BIP9 will work just fine anyway. And if there are problems, the 6-month period should weed it out. Finally, miners cannot hold the feature hostage since the 24-month BIP8 period will exist anyway.

PSA: Being Resilient to Upgrades

Software is very birttle.
Anyone who has been using software for a long time has experienced something like this:
  1. You hear a new version of your favorite software has a nice new feature.
  2. Excited, you install the new version.
  3. You find that the new version has subtle incompatibilities with your current workflow.
  4. You are sad and downgrade to the older version.
  5. You find out that the new version has changed your files in incompatible ways that the old version cannot work with anymore.
  6. You tearfully reinstall the newer version and figure out how to get your lost productivity now that you have to adapt to a new workflow
If you are a technically-competent user, you might codify your workflow into a bunch of programs. And then you upgrade one of the external pieces of software you are using, and find that it has a subtle incompatibility with your current workflow which is based on a bunch of simple programs you wrote yourself. And if those simple programs are used as the basis of some important production system, you hve just screwed up because you upgraded software on an important production system.
And well, one of the issues with new softfork activation is that if not enough people (users and miners) upgrade to the newest Bitcoin software, the security of the new softfork rules are at risk.
Upgrading software of any kind is always a risk, and the more software you build on top of the software-being-upgraded, the greater you risk your tower of software collapsing while you change its foundations.
So if you have some complex Bitcoin-manipulating system with Bitcoin somewhere at the foundations, consider running two Bitcoin nodes:
  1. One is a "stable-version" Bitcoin node. Once it has synced, set it up to connect=x.x.x.x to the second node below (so that your ISP bandwidth is only spent on the second node). Use this node to run all your software: it's a stable version that you don't change for long periods of time. Enable txiindex, disable pruning, whatever your software needs.
  2. The other is an "always-up-to-date" Bitcoin Node. Keep its stoarge down with pruning (initially sync it off the "stable-version" node). You can't use blocksonly if your "stable-version" node needs to send transactions, but otherwise this "always-up-to-date" Bitcoin node can be kept as a low-resource node, so you can run both nodes in the same machine.
When a new Bitcoin version comes up, you just upgrade the "always-up-to-date" Bitcoin node. This protects you if a future softfork activates, you will only receive valid Bitcoin blocks and transactions. Since this node has nothing running on top of it, it is just a special peer of the "stable-version" node, any software incompatibilities with your system software do not exist.
Your "stable-version" Bitcoin node remains the same version until you are ready to actually upgrade this node and are prepared to rewrite most of the software you have running on top of it due to version compatibility problems.
When upgrading the "always-up-to-date", you can bring it down safely and then start it later. Your "stable-version" wil keep running, disconnected from the network, but otherwise still available for whatever queries. You do need some system to stop the "always-up-to-date" node if for any reason the "stable-version" goes down (otherwisee if the "always-up-to-date" advances its pruning window past what your "stable-version" has, the "stable-version" cannot sync afterwards), but if you are technically competent enough that you need to do this, you are technically competent enough to write such a trivial monitor program (EDIT: gmax notes you can adjust the pruning window by RPC commands to help with this as well).
This recommendation is from gmaxwell on IRC, by the way.
submitted by almkglor to Bitcoin [link] [comments]

txindex=1 server=1 question (node, rpc)

Edit: solved! Just needed to wait for indexing to catch up
Hi all I'm trying to use btc-rpc-explorer
https://github.com/janoside/btc-rpc-explorer
I have a full node via bitcoin qt. Can I use qt for block explorer?
I launch block explorer and I'm getting rpc error. The webpage states "check rpc connection info"
The github project states I need server=1 and txindex=1. Can I make qt run with these settings? I tried adding them to the .conf but how can I confirm qt is running with these options, in console somehow?
In case I can't use qt for this I downloaded bitcoind. It looks like I can start the daemon with txindex=1 and server=1 but still getting same connection problem with btc-rpc-explorer.
Do I have to do -reindex=1? Can I do that within qt? If not and I use bitcoin cli will it disrupt qt in any way?
Thanks
Edit: this is on Ubuntu
submitted by redditor157b to Bitcoin [link] [comments]

Fun with Dynamic DNS services and bitcoind

I realize that bitcoind has this capability built in, but thought it might be fun to configure it manually. As some background, most people look at their network and they have some address like 192.168.1.105. That is a private network address. Sites like WhatIsMyIpAddress.com will tell you what your EXTERNAL IP address is. When your running a bitcoin node, people will connect to your external IP.
Problem is... your ISP may cycle that IP address every week or so. bitcoind has a nice feature baked in called discover which will do the work of guessing your external IP as it changes. But if you are doing anything where you need to expose your RPC API externally (*danger*) then it would be nice to have some FQDN to go after to do the IP translation.
Originally, I had always solved this by exposing my node as an onion node. Since onion nodes traverse NATs and firewalls fairly effortlessly this was an easy option. But previously I had played around with Dynamic DNS service. I've used noip.com but there are likely dozens of services out there that will get the job done.
Once you have enabled a NoIP hostname, you can name it in your bitcoin.conf using the externalip=coolbtcnode.ddns.net. Then, assuming you setup all the RPC auth and port forwarding, you could access your node via RPC at coolbtcnode.ddns.net
As I said... it's a redundancy, since discover=1 does most of this for you, but still thought someone might enjoy the tip.
References:
submitted by brianddk to Bitcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Bisq not connecting to local bitcoind

Hi, I run Bisq 1.1.7 (and before it's predecessor with the same problem) on my linux box, and I have problems connecting to my local bitcoind. The log says:
Oct-12 21:33:59.240 [PeerGroup Thread] INFO o.b.c.PeerGroup: Attempting connection to [127.0.1.1]:8333 (0 connected, 1 pending, 1 max)
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.n.NioClientManager: Connected to /127.0.1.1:8333
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.core.Peer: Announcing to /127.0.1.1:8333 as: /bitcoinj:0.14.7.bisq.1-SNAPSHOT/Bisq:1.1.7/
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.core.Peer: [127.0.1.1]:8333: Got version=70015, subVer='/Satoshi:0.18.1/', services=0x1037, time=2019-10-12 21:33:59, blocks=599090
Oct-12 21:33:59.241 [NioClientManager] INFO o.b.c.PeerGroup: [127.0.1.1]:8333: New peer (1 connected, 0 pending, 1 max)
Oct-12 21:33:59.242 [NioClientManager] INFO o.b.c.PeerGroup: Setting download peer: [127.0.1.1]:8333
Oct-12 21:33:59.242 [NioClientManager] INFO o.b.c.l.DownloadProgressTracker: Chain download switched to [127.0.1.1]:8333
Oct-12 21:33:59.287 [NioClientManager] INFO o.b.c.PeerGroup: [127.0.1.1]:8333: Peer died (0 connected, 0 pending, 1 max)
Oct-12 21:33:59.287 [NioClientManager] INFO o.b.c.PeerGroup: Download peer died. Picking a new one.
Oct-12 21:33:59.288 [NioClientManager] INFO o.b.c.PeerGroup: Unsetting download peer: [127.0.1.1]:8333
Oct-12 21:33:59.288 [PeerGroup Thread] INFO o.b.c.PeerGroup: Waiting 1000 msec before next connect attempt to [127.0.0.1]:8333

The GUI shows the "connected peer" flickering on and off, the status line on the bottom shows "Bitcoin network peers: [0/1]" flickering between 0 and 1, and the radiobuttons for selecting a bitcoind greyed out, so I can't edit anything in the GUI. I tried the --rpcXXXX commandline options with no change. My node is fully synced and not pruned.
netstat shows:
tcp 0 0 127.0.0.1:83320.0.0.0:* LISTEN 8542/bitcoin-qt
tcp 0 0 0.0.0.0:83330.0.0.0:* LISTEN 8542/bitcoin-qt
with 8332 being the rpc port.
Any ideas?
submitted by kbdwarrior to bisq [link] [comments]

Daily analysis of cryptocurrencies 20191005(Market index 31 — Fear state)

Daily analysis of cryptocurrencies 20191005(Market index 31 — Fear state)

https://preview.redd.it/oly12rv9rqq31.png?width=1500&format=png&auto=webp&s=6667e09b78b0edc6dc3b411e5f96bba36f4a6430

Attorney General Barr Signs Letter To Facebook From US, UK, And Australian Leaders Regarding Use Of End-To-End Encryption The Department of Justice published an open letter on October 3 to Facebook from international law enforcement partners from the United States, United Kingdom, and Australia in response to the company’s publicly announced plans to implement end-to-end-encryption across its messaging services. The letter is signed by Attorney General William P. Barr, United Kingdom Home Secretary Priti Patel, Australia’s Minister for Home Affairs Peter Dutton, and Acting Homeland Security Secretary Kevin McAleenan. Addressed to Facebook’s CEO, Mark Zuckerberg, the letter requests that Facebook not proceed with its end-to-end encryption plan without ensuring there will be no reduction in the safety of Facebook users and others, and without providing law enforcement court-authorized access to the content of communications to protect the public, particularly child users.
Coincheck Launches New Service That Rewards Gas Users With Bitcoin In an attempt to bring crypto to the mass audience, Japanese crypto exchange Coincheck inked a partnership deal with E-net Systems to reward gas users in the Tokyo Gas area, the company announced Oct 4. Under the partnership agreement, the two companies will start offering Coincheck Gas with two crypto-related plans for its customers. The gas service by the crypto company will offer a Bitcoin Rewards Plan under which customers will receive Bitcoin as rewards for the usage of gas. In addition, customers can also pay their gas bills using Bitcoin under the Bitcoin Payment Plan.
Libra Association: 1500 Entities Have Indicated Enthusiastic Interest To Join Libra After PayPal announced to withdraw their support for Facebook’s Libra cryptocurrency, Libra posted a series of tweets in response to the striking news. Libra Association tweeted: “Building a modern, low-friction, high-security payment network that can empower billions of financially underserved people is a journey, not a destination. This journey to build a generational payment network like the Libra project is not an easy path.” “We recognize that change is hard, and that each organization that started this journey will have to make its own assessment of risks and rewards of being committed to seeing through the change that Libra promises,” they continued. The final tweet read: “We look forward to the first Libra Council meeting in 10 days and will be sharing updates following that, including details of the 1,500 entities that have indicated enthusiastic interest to participate.”
Prysmatic Labs Team Unveils Updates On The Ethereum Serenity Roadmap Prysmatic Labs team has unveiled biweekly updates on the Ethereum Serenity roadmap via Medium. According to the article, the testnet has been restarted for everyone to experience staking and becoming a validator. This testnet includes beacon chain spec v0.8.4, various performance improvements, faster BLS paring library, new syncing strategies and more RPC end point support.
Japan: Using Virtual Currency To Make Donations To Politicians Is Legal Citing Yomiuri Shimbun, the Japanese Ministry of Internal Affairs and Communications, a cabinet-level ministry in the Government of Japan, indicated that the use of virtual currency to donate to politicians is not illegal. According to Japan’s Political Fund Control Law, it is prohibited to conduct donations to politicians in principle, but virtual currency is not in the category of “money and securities” which are covered by law.

Encrypted project calendar(October 05, 2019)

Ontology (ONT): Ony Ji will attend the blockchain event in Japan on October 5th and explain the practical application based on the ontology network. BNB/Binance Coin: The Binance Coin (BNB) Oasis Game Hackathon will be held on October 5th in Bangalore, India, and will be hosted by Binance Labs, Matic Network, Cocos-BCX, Celer Network, Marlin Protocol.

Encrypted project calendar(October 06, 2019)

SPND/ Spendcoin: Spendcoin (SPND) will be online on October 6th

Encrypted project calendar(October 07, 2019)

GNO/Gnosis: Gnosis (GNO) will discuss the topic “Decentralized Trading Agreement Based on Ethereum” will be held in Osaka, Japan on October 7th. Kyber and Uniswap, Gnosis and Loopring will attend and give speeches.

Encrypted project calendar(October 08, 2019)

BTC/Bitcoin: The 2nd Global Digital Mining Summit will be held in Frankfurt, Germany from October 8th to 10th.

Encrypted project calendar(October 09, 2019)

CENNZ/Centrality: Centrality (CENNZ) will meet in InsurTechNZ Connect — Insurance and Blockchain on October 9th in Auckland.

Encrypted project calendar(October 10, 2019)

INB/Insight Chain: The Insight Chain (INB) INB public blockchain main network will be launched on October 10. VET/Vechain: VeChain (VET) will attend the BLOCKWALKS Blockchain Europe Conference on October 10. CAPP/Cappasity: Cappasity (CAPP) Cappasity will be present at the Osaka Global Innovation Forum in Osaka (October 10–11).

Encrypted project calendar(October 11, 2019)

OKB/OKB: OKB (OKB) OKEx series of talks will be held in Istanbul on October 11th to discuss “the rise of the Turkish blockchain.”

Encrypted project calendar(October 12, 2019)

BTC/Bitcoin: The 2019 Global Mining Leaders Summit will be held in Chengdu, China from October 12th to 14th.

Encrypted project calendar(October 14, 2019)

BCH/Bitcoin Cash: The ChainPoint 19 conference will be held in Armenia from October 14th to 15th.

Encrypted project calendar(October 15, 2019)

RUFF/RUFF Token: Ruff will end the three-month early bird program on October 15th KAT/Kambria: Kambria (KAT) exchanges ERC20 KAT for a 10% bonus on BEP2 KAT-7BB, and the token exchange reward will end on October 15. BTC/Bitcoin: The Blockchain Technology Investment Summit (CIS) will be held in Los Angeles from October 15th to 16th.

Encrypted project calendar(October 16, 2019)

BTC/Bitcoin: The 2019 Blockchain Life Summit will be held in Moscow, Russia from October 16th to 17th. MIOTA/IOTA: IOTA (MIOTA) IOTA will host a community event on the theme of “Technology Problem Solving and Testing IoT Devices” at the University of Southern California in Los Angeles on October 16. ETH/Ethereum: Ethereum launches Istanbul (Istanbul) main network upgrade, this main network upgrade involves 6 code upgrades. QTUM/Qtum: Qtum (QTUM) Qtum main network hard fork is scheduled for October 16.

Encrypted project calendar(October 18, 2019)

BTC/Bitcoin: The SEC will give a pass on the VanEck/SolidX ETF on October 18th and make a final decision HB/HeartBout: HeartBout (HB) will officially release the Android version of the HeartBout app on October 18.

Encrypted project calendar(October 19, 2019)

PI/PCHAIN Network: The PCHAIN (PI) backbone (Phase 5, 82 nodes, 164, 023, 802 $ PI, 7 candidates) will begin on October 19. LINK/ChainLink: Diffusion 2019 will be held in Berlin, Germany from October 19th to 20th

Encrypted project calendar(October 21, 2019)

KNC/Kyber Network: The official online hackathon of the Kyber Network (KNC) project will end on October 21st, with more than $42,000 in prize money.

Encrypted project calendar(October 22, 2019)

ZRX/0x: The 0x protocol (ZRX) Pantera blockchain summit will be held on October 22.

Encrypted project calendar(October 23, 2019)

MIOTA/IOTA: IOTA (MIOTA) IOTA will host a community event on October 23rd at the University of Southern California in Los Angeles with the theme “Connecting the I3 Market and Experiencing Purchase and Sales Data.” BTC/Bitcoin: The WBS World Blockchain Summit (Middle East) will be held in Dubai from October 23rd to 24th.

Encrypted project calendar(October 24, 2019)

BCN/Bytecoin: Bytecoin (BCN) released the hidden amount of the Bytecoin block network on October 24.

Encrypted project calendar(October 25, 2019)

ADA/Cardano: Cardano (ADA) The Ada community will host a community gathering in the Dominican Republic for the first time on October 25.

Encrypted project calendar(October 26, 2019)

KAT/Kambria: Kambria (KAT) Kambria will host the 2019 Southern California Artificial Intelligence and Data Science Conference in Los Angeles on October 26th with IDEAS. BTC/Bitcoin: CoinAgenda Global Summit will be held in Las Vegas from October 26th to 28th

Encrypted project calendar(October 28, 2019)

LTC/Litecoin: Litecoin (LTC) 2019 Litecoin Summit will be held from October 28th to October 29th in Las Vegas, USA BTC/Bitcoin: Mt.Gox changes the debt compensation plan submission deadline to October 28 ZEC/Zcash: Zcash (ZEC) will activate the Blossom Agreement on October 28th

Encrypted project calendar(October 29, 2019)

BTC/Bitcoin: The 2nd World Encryption Conference (WCC) will be held in Las Vegas from October 29th to 31st.

Encrypted project calendar(October 30, 2019)

MIOTA/IOTA: IOTA (MIOTA) IOTA will host a community event on October 30th at the University of Southern California in Los Angeles on the topic “How to store data on IOTA Tangle.”
https://preview.redd.it/jfxnwvgcrqq31.png?width=473&format=png&auto=webp&s=6adc6ab9f1c8a5f14874041d1e57a6721b8023b3

On the chart, we can see that the price made a break of the lower resistance boundary of the “triangle with a flat bottom” formation in the zone of $9560–9580. At the same time, 157 SMA was broken, which confirmed the dominance of sellers. Now the price is trading around $8100–8250, at the border of the resistance of descending channel. Consolidation of the price indicates the current period of accumulation, interest of buyers and a potential return to the upper boundary of the descending channel to $9100–9200 zone. After the middle of the month, the price may rebound from the support level of the descending channel and return to the area of $​​8900–9300, where there is a strong resistance. Also, the other day, the level of 8200 was traded and once again protected. The common mood is to fall, and we know that often the market goes against the majority. A lot of people are in shorts and this is an excellent point for growth (their stops and liquidation of positions, as was the case recently with longsters)
Review previous articles: https://medium.com/@to.liuwen

Telegram: https://t.me/Lay126
Twitter:https://twitter.com/mianhuai8
Facebook:https://www.facebook.com/profile.php?id=100022246432745
Reddi:https://www.reddit.com/useliuidaxmn
LinkedIn:https://www.linkedin.com/in/liu-wei-294a12176/
submitted by liuidaxmn to u/liuidaxmn [link] [comments]

Bitcoin Verde v1.2.1 - 20191115 HF Support

Bitcoin Verde v1.2.1

https://github.com/SoftwareVerde/bitcoin-verde
What's new in v1.2.1:
If you're running a Bitcoin Verde node be sure to upgrade to the latest version before the 15th. And feel free to let me know you're running a node--it would be great to hear. Currently the resources required to run a node are quite large, so we don't expect there to be many until a subsequent release. Additionally, there have been some database changes since the last major release, but migration will be handled during the node's first restart. If you encounter any problems just send me a message, or find me in Telegram: https://t.me/bitcoinverde .
Notable upgrades for this patch is support for the 20191115 HF, which includes Schnorr signature support for multisig transactions.
Bitcoin Verde put a strong emphasis on SLP support this release which includes RPC commands for checking the validity of SLP transactions. SLP Transactions may be checked via the explorer's API or checked directly via RPC. You can refer to the scripts directory, or check the documentation at https://bitcoinverde.org/documentation/#rpc for more details.
What's coming in future releases:
We have added two custom network calls for SPV wallets to query the validity of SLP transactions. These calls are obviously trusted calls, and the network level is not encrypted, so they may be subject to man-in-the-middle attacks without special considerations. We're refining this feature and plan to release it in the next version of Bitcoin Verde.
We are also investing a lot of effort in improving the initial-block-download times of Bitcoin Verde. This feature involves a rather large database restructure, but has shown to improve performance of the IBD and synced validation significantly. Currently Bitcoin Verde stores, validates, and indexes transactions at a rate of ~2k-12k tx/s, depending on hardware, configuration, and mempool synchronization with the network. We expect to double this in a near-future release.
We've also been collaborating with Xavier Kral from bitcoin.com to reduce to disk footprint of Bitcoin Verde via both hardening "trim" mode and changing the way some data is stored within the database without losing existing functionality.
As always, we're proud to be a part of the Bitcoin Cash community, and love collaborating with brilliant people like Mark Lundeburg, Josh Ellithorpe, Amaury Séchet, and many many others.
submitted by FerriestaPatronum to btc [link] [comments]

⚡ Lightning Network Megathread ⚡

Last updated 2018-01-29
This post is a collaboration with the Bitcoin community to create a one-stop source for Lightning Network information.
There are still questions in the FAQ that are unanswered, if you know the answer and can provide a source please do so!

⚡What is the Lightning Network? ⚡

Explanations:

Image Explanations:

Specifications / White Papers

Videos

Lightning Network Experts on Reddit

  • starkbot - (Elizabeth Stark - Lightning Labs)
  • roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • stile65 - (Alex Akselrod - Lightning Labs)
  • cfromknecht - (Conner Fromknecht - Lightning Labs)
  • RustyReddit - (Rusty Russell - Blockstream)
  • cdecker - (Christian Decker - Blockstream)
  • Dryja - (Tadge Dryja - Digital Currency Initiative)
  • josephpoon - (Joseph Poon)
  • fdrn - (Fabrice Drouin - ACINQ )
  • pmpadiou - (Pierre-Marie Padiou - ACINQ)

Lightning Network Experts on Twitter

  • @starkness - (Elizabeth Stark - Lightning Labs)
  • @roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • @stile65 - (Alex Akselrod - Lightning Labs)
  • @bitconner - (Conner Fromknecht - Lightning Labs)
  • @johanth - (Johan Halseth - Lightning Labs)
  • @bvu - (Bryan Vu - Lightning Labs)
  • @rusty_twit - (Rusty Russell - Blockstream)
  • @snyke - (Christian Decker - Blockstream)
  • @JackMallers - (Jack Mallers - Zap)
  • @tdryja - (Tadge Dryja - Digital Currency Initiative)
  • @jcp - (Joseph Poon)
  • @alexbosworth - (Alex Bosworth - yalls.org)

Medium Posts

Learning Resources

Books

Desktop Interfaces

Web Interfaces

Tutorials and resources

Lightning on Testnet

Lightning Wallets

Place a testnet transaction

Altcoin Trading using Lightning

  • ZigZag - Disclaimer You must trust ZigZag to send to Target Address

Lightning on Mainnet

Warning - Testing should be done on Testnet

Atomic Swaps

Developer Documentation and Resources

Lightning implementations

  • LND - Lightning Network Daemon (Golang)
  • eclair - A Scala implementation of the Lightning Network (Scala)
  • c-lightning - A Lightning Network implementation in C
  • lit - Lightning Network node software (Golang)
  • lightning-onion - Onion Routed Micropayments for the Lightning Network (Golang)
  • lightning-integration - Lightning Integration Testing Framework
  • ptarmigan - C++ BOLT-Compliant Lightning Network Implementation [Incomplete]

Libraries

Lightning Network Visualizers/Explorers

Testnet

Mainnet

Payment Processors

  • BTCPay - Next stable version will include Lightning Network

Community

Slack

IRC

Slack Channel

Discord Channel

Miscellaneous

⚡ Lightning FAQs ⚡

If you can answer please PM me and include source if possible. Feel free to help keep these answers up to date and as brief but correct as possible
Is Lightning Bitcoin?
Yes. You pick a peer and after some setup, create a bitcoin transaction to fund the lightning channel; it’ll then take another transaction to close it and release your funds. You and your peer always hold a bitcoin transaction to get your funds whenever you want: just broadcast to the blockchain like normal. In other words, you and your peer create a shared account, and then use Lightning to securely negotiate who gets how much from that shared account, without waiting for the bitcoin blockchain.
Is the Lightning Network open source?
Yes, Lightning is open source. Anyone can review the code (in the same way as the bitcoin code)
Who owns and controls the Lightning Network?
Similar to the bitcoin network, no one will ever own or control the Lightning Network. The code is open source and free for anyone to download and review. Anyone can run a node and be part of the network.
I’ve heard that Lightning transactions are happening “off-chain”…Does that mean that my bitcoin will be removed from the blockchain?
No, your bitcoin will never leave the blockchain. Instead your bitcoin will be held in a multi-signature address as long as your channel stays open. When the channel is closed; the final transaction will be added to the blockchain. “Off-chain” is not a perfect term, but it is used due to the fact that the transfer of ownership is no longer reflected on the blockchain until the channel is closed.
Do I need a constant connection to run a lightning node?
Not necessarily,
Example: A and B have a channel. 1 BTC each. A sends B 0.5 BTC. B sends back 0.25 BTC. Balance should be A = 0.75, B = 1.25. If A gets disconnected, B can publish the first Tx where the balance was A = 0.5 and B = 1.5. If the node B does in fact attempt to cheat by publishing an old state (such as the A=0.5 and B=1.5 state), this cheat can then be detected on-chain and used to steal the cheaters funds, i.e., A can see the closing transaction, notice it's an old one and grab all funds in the channel (A=2, B=0). The time that A has in order to react to the cheating counterparty is given by the CheckLockTimeVerify (CLTV) in the cheating transaction, which is adjustable. So if A foresees that it'll be able to check in about once every 24 hours it'll require that the CLTV is at least that large, if it's once a week then that's fine too. You definitely do not need to be online and watching the chain 24/7, just make sure to check in once in a while before the CLTV expires. Alternatively you can outsource the watch duties, in order to keep the CLTV timeouts low. This can be achieved both with trusted third parties or untrusted ones (watchtowers). In the case of a unilateral close, e.g., you just go offline and never come back, the other endpoint will have to wait for that timeout to expire to get its funds back. So peers might not accept channels with extremely high CLTV timeouts. -- Source
What Are Lightning’s Advantages?
Tiny payments are possible: since fees are proportional to the payment amount, you can pay a fraction of a cent; accounting is even done in thousandths of a satoshi. Payments are settled instantly: the money is sent in the time it takes to cross the network to your destination and back, typically a fraction of a second.
Does Lightning require Segregated Witness?
Yes, but not in theory. You could make a poorer lightning network without it, which has higher risks when establishing channels (you might have to wait a month if things go wrong!), has limited channel lifetime, longer minimum payment expiry times on each hop, is less efficient and has less robust outsourcing. The entire spec as written today assumes segregated witness, as it solves all these problems.
Can I Send Funds From Lightning to a Normal Bitcoin Address?
No, for now. For the first version of the protocol, if you wanted to send a normal bitcoin transaction using your channel, you have to close it, send the funds, then reopen the channel (3 transactions). In future versions, you and your peer would agree to spend out of your lightning channel funds just like a normal bitcoin payment, allowing you to use your lightning wallet like a normal bitcoin wallet.
Can I Make Money Running a Lightning Node?
Not really. Anyone can set up a node, and so it’s a race to the bottom on fees. In practice, we may see the network use a nominal fee and not change very much, which only provides an incremental incentive to route on a node you’re going to use yourself, and not enough to run one merely for fees. Having clients use criteria other than fees (e.g. randomness, diversity) in route selection will also help this.
What is the release date for Lightning on Mainnet?
Lightning is already being tested on the Mainnet Twitter Link but as for a specific date, Jameson Lopp says it best
Would there be any KYC/AML issues with certain nodes?
Nope, because there is no custody ever involved. It's just like forwarding packets. -- Source
What is the delay time for the recipient of a transaction receiving confirmation?
Furthermore, the Lightning Network scales not with the transaction throughput of the underlying blockchain, but with modern data processing and latency limits - payments can be made nearly as quickly as packets can be sent. -- Source
How does the lightning network prevent centralization?
Bitcoin Stack Exchange Answer
What are Channel Factories and how do they work?
Bitcoin Stack Exchange Answer
How does the Lightning network work in simple terms?
Bitcoin Stack Exchange Answer
How are paths found in Lightning Network?
Bitcoin Stack Exchange Answer
How would the lightning network work between exchanges?
Each exchange will get to decide and need to implement the software into their system, but some ideas have been outlined here: Google Doc - Lightning Exchanges
Note that by virtue of the usual benefits of cost-less, instantaneous transactions, lightning will make arbitrage between exchanges much more efficient and thus lead to consistent pricing across exchange that adopt it. -- Source
How do lightning nodes find other lightning nodes?
Stack Exchange Answer
Does every user need to store the state of the complete Lightning Network?
According to Rusty's calculations we should be able to store 1 million nodes in about 100 MB, so that should work even for mobile phones. Beyond that we have some proposals ready to lighten the load on endpoints, but we'll cross that bridge when we get there. -- Source
Would I need to download the complete state every time I open the App and make a payment?
No you'd remember the information from the last time you started the app and only sync the differences. This is not yet implemented, but it shouldn't be too hard to get a preliminary protocol working if that turns out to be a problem. -- Source
What needs to happen for the Lightning Network to be deployed and what can I do as a user to help?
Lightning is based on participants in the network running lightning node software that enables them to interact with other nodes. This does not require being a full bitcoin node, but you will have to run "lnd", "eclair", or one of the other node softwares listed above.
All lightning wallets have node software integrated into them, because that is necessary to create payment channels and conduct payments on the network, but you can also intentionally run lnd or similar for public benefit - e.g. you can hold open payment channels or channels with higher volume, than you need for your own transactions. You would be compensated in modest fees by those who transact across your node with multi-hop payments. -- Source
Is there anyway for someone who isn't a developer to meaningfully contribute?
Sure, you can help write up educational material. You can learn and read more about the tech at http://dev.lightning.community/resources. You can test the various desktop and mobile apps out there (Lightning Desktop, Zap, Eclair apps). -- Source
Do I need to be a miner to be a Lightning Network node?
No -- Source
Do I need to run a full Bitcoin node to run a lightning node?
lit doesn't depend on having your own full node -- it automatically connects to full nodes on the network. -- Source
LND uses a light client mode, so it doesn't require a full node. The name of the light client it uses is called neutrino
How does the lightning network stop "Cheating" (Someone broadcasting an old transaction)?
Upon opening a channel, the two endpoints first agree on a reserve value, below which the channel balance may not drop. This is to make sure that both endpoints always have some skin in the game as rustyreddit puts it :-)
For a cheat to become worth it, the opponent has to be absolutely sure that you cannot retaliate against him during the timeout. So he has to make sure you never ever get network connectivity during that time. Having someone else also watching for channel closures and notifying you, or releasing a canned retaliation, makes this even harder for the attacker. This is because if he misjudged you being truly offline you can retaliate by grabbing all of its funds. Spotty connections, DDoS, and similar will not provide the attacker the necessary guarantees to make cheating worthwhile. Any form of uncertainty about your online status acts as a deterrent to the other endpoint. -- Source
How many times would someone need to open and close their lightning channels?
You typically want to have more than one channel open at any given time for redundancy's sake. And we imagine open and close will probably be automated for the most part. In fact we already have a feature in LND called autopilot that can automatically open channels for a user.
Frequency will depend whether the funds are needed on-chain or more useful on LN. -- Source
Will the lightning network reduce BTC Liquidity due to "locking-up" funds in channels?
Stack Exchange Answer
Can the Lightning Network work on any other cryptocurrency? How?
Stack Exchange Answer
When setting up a Lightning Network Node are fees set for the entire node, or each channel when opened?
You don't really set up a "node" in the sense that anyone with more than one channel can automatically be a node and route payments. Fees on LN can be set by the node, and can change dynamically on the network. -- Source
Can Lightning routing fees be changed dynamically, without closing channels?
Yes but it has to be implemented in the Lightning software being used. -- Source
How can you make sure that there will be routes with large enough balances to handle transactions?
You won't have to do anything. With autopilot enabled, it'll automatically open and close channels based on the availability of the network. -- Source
How does the Lightning Network stop flooding nodes (DDoS) with micro transactions? Is this even an issue?
Stack Exchange Answer

Unanswered Questions

How do on-chain fees work when opening and closing channels? Who pays the fee?
How does the Lightning Network work for mobile users?
What are the best practices for securing a lightning node?
What is a lightning "hub"?
How does lightning handle cross chain (Atomic) swaps?

Special Thanks and Notes

  • Many links found from awesome-lightning-network github
  • Everyone who submitted a question or concern!
  • I'm continuing to format for an easier Mobile experience!
submitted by codedaway to Bitcoin [link] [comments]

Nano timestamps

First off, big thanks to u/Matoking for his nanolib library, and thanks to https://www.alilnano.com/ for the nano to test with
---
TL;DR I made a small API that is able to timestamp strings and json in-real-time using the nano blockchain instead of using the bitcoin blockchain. Check it out here - http://134.209.54.121/ (will be moving it soon). I have a few questions near end of post:

Lately, I've worked on some DNA sequences that I'd like to maintain in the public domain (as a synthetic biologist). In order to do that, I thought it would be nice to timestamp the data I generated on a blockchain (this timestamp does not to be extremely specific, within a few days is fine). At first, I checked out https://opentimestamps.org/ which is a great project. HOWEVER - getting the block takes quite a few hours, which really sucks for integrating it into different applications (https://github.com/opentimestamps/opentimestamps-client/blob/masteREADME.md). I wanted to (nearly) instantly get a hash that can be attributed to a certain piece of data.

Here comes Nano, which is feeless and nearly instant, and so solves my problem. I like hacking little things together, so I made a small Flask app, code here https://github.com/Koeng101/nanotimestamps. You can check out the actual API at http://134.209.54.121/, try it out! (I'm still connected to mynano ninja, so I don't have enough api calls to begin integrating into things)

Questions:
  1. In my understanding, Nano's block lattice basically makes the 'frontier' blocks the only ones that are really saved in a decentralized manner, and previous blocks can be pruned (https://www.reddit.com/nanocurrency/comments/aqq6zm/nano_how_2_blocks_and_lattices/). How about unpocketed transactions? For example (if I remember correctly) xrb_3bejnuc1qx31a37147smsyuu568p7jkuy4yfneoohemqu8psy75g7rys7mck is the hash of 'Hello World', and there are a couple unpocketed transactions floating there, which can never be pocketed unless you can find the private key of that public key. Will those ever be pruned from the ledger?
    1. Is this an ethical project? If those transactions are never removed from the ledger (ie can't be pruned), then that means that every file or json I hash to save will now be bloating the ledger. I'm not too worried about the burn rate, since I only send 1 raw.
    2. How do I set up my node so I can do RPC calls to it? Sorry for being a noob, but I couldn't figure this one out. My node online node is here 134.209.61.219, and I just can't figure out how to remotely connect to it with RPC.
    3. Any other thoughts I should keep in mind?

Next steps:
  1. I bought the domain names nanotimestamps.com and nanotimestamps.org to set up a more official looking website
  2. I plan on adding in file upload to the API
  3. I plan on adding upgrading the CPU so I can solve the PoW quicker (main bottleneck)

Nano rocks! Thanks for being awesome people.
submitted by koeng101 to nanocurrency [link] [comments]

Unitimes AMA | Danger in Blockchain, Data Protection is Necessary

Unitimes AMA | Danger in Blockchain, Data Protection is Necessary
https://preview.redd.it/22zrdwgeg3m31.jpg?width=1280&format=pjpg&auto=webp&s=1370c511afa85ec06cda6843c36aa9289456806d
At 10:30 on September 12, Unitimes held the 40th online AMA about blockchain technologies and applications. We were glad to have Joanes Espanol , CEO and CTO of Amberdata, to share with us on ‘’Danger in Blockchain, Data Protection is Necessary‘’ . The AMA is composed of two parts : Fixed Q&A and Free Q&A. Check out the details below!

Fixed Q&A

  1. Please introduce yourself and Amberdata
Hi everybody, my name is Joanes Espanol and I am co-founder and CTO of Amberdata. Prior to founding Amberdata, I have worked on several large scale ingestion pipelines, distributed systems and analytics platforms, with a focus on infrastructure automation and highly available systems. I am passionate about information retrieval and extracting meaning from data.
Amberdata is a blockchain and digital asset company which combines validated blockchain and market data from the top crypto exchanges into a unified platform and API, enabling customers to operate with confidence and build real-time data-powered applications.
  1. What type of data does the API provide?
The advantage and uniqueness of Amberdata’s API is the combination of blockchain and pricing data together in one API call.
We provide a standardized way to access blockchain data (blocks, transactions, account information, etc) across different blockchain models like UTXO (Bitcoin, Litecoin, Dash, Zcash...) and Account Based (Ethereum...), with contextualized pricing data from the top crypto exchanges in one API call. If you want to build applications on top of different blockchains, you would have to learn the intricacies of each distributed ledgers, run multiple nodes, aggregate the data, etc - instead of spending all that time and money, you can start immediately by using the APIs that we provide.
What can you get access to? Accounts, account-balances, blocks, contracts, internal messages, logs and events, pending transactions, security audits, source code, tokens, token balances, token transfers, token supplies (circulating & total supplies), transactions as well as prices, order books, trades, tickers and best bid and offers for about 2,000 different assets.
One important thing to note is that most of the APIs return validated data that anybody can verify by themselves. Blockchain is all about trust - operating in a hostile and trustless environment, maintaining consensus while continuously under attack, etc - and we want to make sure that we maintain that level of trust, so the API returns all the information that you would need to recalculate Merkle proofs yourself, hence guaranteeing the data was not tampered with and is authentique.
  1. Why is it important to combine blockchain and market data?
Cryptoeconomics plays a key role in the blockchain world. One simple way to explain this is to look at why peer-to-peer file sharing systems like BitTorrent failed. These file sharing protocols were an early form of decentralization, with each node contributing to and participating in this “global sharing computer”. The issue with these protocols is that they relied on the good will of each participant to (re-)share their files - but without economic incentive, or punishment for not following the rules, it opened the door to bad behavior which ultimately led to its demise.
The genius of Satoshi Nakamoto was to combine and improve upon existing decentralized protocols with game theory, to arrive at a consensus protocol able to circumvent the Byzatine’s General Problem. Now participants have incentives to follow the rules (they get financially rewarded for doing so by mining for example, and penalized for misbehaving), which in turn results in a stable system. This was the first time that crypto-economics were used in a working product and this became the base and norm for a lot of the new systems today.
Pricing data is needed as context to blockchain data: there are a lot of (ERC-20) tokens created on Ethereum - it is very easy to clone an existing contract, and configure it with a certain amount of initial tokens (most commonly in the millions and billions in volume). Each token has an intrinsic value, as determined by the law of supply and demand, and as traded on the exchanges. Price fluctuations have an impact on the adoption and usage, meaning on the overall transaction volume (and to a certain extent transaction throughput) on the blockchain.
Blockchain data is needed as context to market data: activity on blockchain can have an impact on market data. For example, one can look at the incoming token transfers in the Ethereum transaction pool and see if there are any impending big transfers for a specific token, which could result in a significant price move on the other end. Being able to detect that kind of movement and act upon it is the kind of signals that traders are looking for. Another example can be found with token supplies: exchanges want to be notified as soon as possible when a token circulating supply changes, as it affects their trading ability, and in the worst case scenario, they would need to halt trading if a token contract gets compromised.
In conclusion, events on the blockchain can influence price, and market events also have an impact on blockchain data: the two are intimately intertwined, and putting them both in context leads to better insights and better decision making.
  1. All the data you provide is publicly available, what gives?
Very true, all this data is publicly available, that is one of the premises and fundamentals of blockchain models, where all the data is public and transparent across all the nodes of the network. The problem is that, even though it is publicly available, it is not quick, not easy and not cheap to access.
Not quick: blockchain data structures were designed and optimized for achieving consensus in a hostile and trustless environment and for internal state management, not for random access and overall search. Imagine you want to list all the transactions that your wallet address has participated in? The only way to do that would be to replay all the transactions from the beginning of time (starting at the genesis block), looking at the to and from addresses and retain only the ones matching your wallet: at over 500 million of transactions as of today, it will take some unacceptable amount of time to retrieve that list for a customer facing application.
Not easy: Some very basic things that one would expect when dealing with financial assets and instruments are actually very difficult to get at, especially when related to tokens. For example, the current Ether balance of a wallet is easy to retrieve in one call to a Geth or Parity client - however, looking at time series of these balances starts to be a little hairy, as not all historical state is kept by these clients, unless you are running a full archive node. Looking at token holdings and balances gets even more complicated, as most of the token transfers are part of the transient state and not kept on chain. Moreover, token transfers and balance changes over time are triggered by different mechanisms (especially when dealing with contract to contract function calls), and detecting these changes accurately is prone to errors.
Not cheap: As mentioned above, most of the historical data and time series metrics are only available via a full archive node, which at the time of writing requires about 3TB of disk space, just to hold all the blockchain state - and remember, this state is in a compressed and not easily accessible format. To convert it to a more searchable format requires much more space. Also, running your own full archive node requires constant care, maintenance and monitoring, which has become very expensive and prohibitive to run.
  1. Who uses your API today and what do they do with it?
A wide variety of applications and projects are using our API, across different industries ranging from wallets and trust funds (DappRadar), to accounting and arbitrage firms (Moremath), including analytics (Stratcoins) and compliance & security companies (Blue Swan). Amberdata’s API is attractive to many different people because it is very complete and fast, and it provides additional data enrichment not available in other APIs, and because of these, it appeals to and fits nicely with our customers use cases:
· It can be used in the traditional REST way to augment your own processes or enrich your own data with hard to get pieces of information. For example, lots of our users retrieve historical information (blocks and transactions) and relay it in their applications to their own customers, while others are more interested in financial data (account & token balances) and time series for portfolio management.
https://medium.com/amberdata/keep-it-dry-use-amberdatas-api-9cdb222a41ba
· Other projects are more in need of real-time up-to-date data, for which we recommend using our websockets, so you can filter out data in real-time and match your exact needs, rather than getting the firehose of information and having to filter out and discard 99% of it.
· We have a few research projects tapping into our API as well. For example, some of our customers want access to historical market data to backtest their trading strategies and fine-tune their own algorithms.
· Our API is also fully Json RPC compliant, meaning some people use it as a drop-in replacement for their own node, or as an alternative to Infura for example. We have some customers using both Amberdata and Infura as their web3 providers, with the benefits of getting additional enriched data when connecting to our API.
· And finally, we have also built an SDK on top of the API itself, so it is easier to integrate into your own application (https://www.npmjs.com/package/web3data-js).
We also have several subscriptions to match your needs. The developer tier is free and gets you access to 90% of all the data. If you are not sure about your usage patterns yet, we recommend the on-demand plan to get started, while for heavy users the professional and enterprise plans would be more adequate - see https://amberdata.io/pricing for more information.
All and all, we try really hard to make it as easy as possible to use for you. We do the heavy lifting, so you don’t have to worry about all the minutia and you can focus on bringing value to your customers. We work very closely with our customers and continuously improve upon and add new features to our API. If something is not supported or you want something that is not in the API, chances are we already have the data, do not hesitate to ask us ;)
  1. Amberdata recently made some headlines for discovering a vulnerability on Parity client. Can you tell us a bit more about it?
This is an interesting one. One of our internal processes flagged a contract, and more specifically the balanceOf(...) call: it was/is taking more than 5 seconds to execute (while typically this call takes only a few milliseconds). While investigating further, we started looking at the debug traces for that contract call and were pretty surprised when a combination of trace_call+vmTrace crashed our Parity node - and not just randomly, the same call would exhibit the exact same behavior each time, and on different Parity nodes. It turns out that this contract is very poorly written, and the implementation of balanceOf(...) keeps on looping over all the holders of the token, which eventually runs out of memory.
Even though this is a pretty severe bug (any/all Parity node(s) can be remotely shutdown with just one small call to its API), in practice the number of nodes at risk is probably small because only operators who have enabled public facing RPC calls (and possibly the ones who have enabled tracing as well) are affected - which are both disabled by default. Kudos to the Parity team for fixing and releasing a patch in less than 24 hours after the bug was reported!
  1. How do you access the data? How do I get started?
We sometimes get the question, “I do not know how to code, can I still use your data?”, and it is possible! We have built a few dashboards on our platform, and you can visualize and monitor different metrics, and get alerts: https://amberdata.io/dashboards/infrastructure.
A good starting point is to use our Postman collection, which is pretty complete and can give you a very good overview of all the capabilities: https://amberdata.io/docs/libraries and https://www.getpostman.com/collections/79afa5bafe91f0e676d6.
For more advanced users, the REST API is where you should start, but as I mentioned earlier, how to access the data depends on your use case: REST, websockets, Json RPC and SDK are the most commonly ways of getting to it. We have a lot of tutorials and code examples available here: https://amberdata.io/docs.
For developers interested in getting access to Amberdata’s blockchain and market data from within their own contract, they can use the Chainlink Oracle contract, which integrates directly with the API:
https://medium.com/amberdata/smart-contract-oracles-with-amberdata-io-358c2c422d8a
  1. Amberdata just recently celebrated 2 years birthday. What is your proudest accomplishment? Any mistake/lesson you would like to share with us?
The blockchain and crypto market is one of the fastest evolving and innovating markets ever, and a very fast paced environment. Having been heads down for two years now, it is sometimes easy to lose sight of the big picture. The journey has been long, but I am happy and proud to see it all come together: we started with blockchain data and monitoring/alerting, added search, validation and derived data (tokens, supplies, etc) along the way, and finally market data to close the loop on all the cryptoeconomics. Seeing the overall engagement from the community around our data is very gratifying: API usage climbing up, more and more pertinent and relevant questions/suggestions on our support channels, other projects like Kadena sending us their own blockchain data so it can be included in Amberdata’s offering… all of these makes me want to do more :)

Free Q&A

---Who are your competitors? What makes you better?
There are a few data providers out there offering similar information as Amberdata. For example, Etherscan has very complete blockchain data for Ethereum, and CoinmarketCap has assets rankings by market cap and some pricing information. We actually did a pretty thorough analysis on the different data providers and they pros and cons:
https://medium.com/amberdata/which-blockchain-data-api-is-right-for-you-3f3758efceb1
What makes Amberdata unique is three folds:
· Combination of blockchain and market data: typically other providers offer one or the other, but not both, and not integrated with each other - with Amberdata, in one API call I can get blockchain and historically accurate pricing data at the same time. We have also standardized access across multiple blockchains, so you get one interface for all and do not have to worry about understanding each and every one of them.
· Validated & verifiable data: we work hard to preserve transparency and trust and are very open about how our metrics are calculated. For example, blockchain data comes with all the pieces needed to recompute the Mekle proofs so the integrity of the data can be verified at any moment. Also, additional metrics like circulating supply are based on tangible and very concrete definitions so anybody can follow and recalculate them by themselves if needed.
· Enriched data: we have spent a lot of time enriching our APIs with (historical) off chain data like token names and symbols, mappings for token addresses and tradable market pairs, etc. At the same time, our APIs are very granular and provide a level of detail that only a few other providers offer, especially with market data (Level 2 with order books across multiple exchanges, Best Bid Offers, etc).
That's all for the 40th AMA. We should like to thank all the community members for their participation and cooperation! Thanks, Joanes!
submitted by Unitimes_ to u/Unitimes_ [link] [comments]

100% WORKING METHOD OF HACK BLOCKCHAIT BITCOIN BTC 2019 Bitcoin Hack Private key on PC 2020 - YouTube Bitcoin generator 2020 free bitcoin generate Coinkanon 100 ... Bitcoin hack Bitcoin mining software - YouTube Hack blockchain wallet Coinbase wallet 2020

problems connecting with bitcoin RPC. Ask Question Asked 6 years ago. ... First, if you want to use RPC commands with the bitcoin core you should add the "server" option (-server on command line or server=1 in bitcoin.conf). Then, I'm pretty sure this has nothing to do with SSL conections but here are the options related to SSL for the bitcoin core (just in case): rpcssl: Use OpenSSL (https ... Bitcoin Core 0.9.2.1 Rpc Calls Extended List (pastebin/bitcoinse X-post) Bitcoin Core 0.9.2.1 RPC Calls Extended List (Pastebin/BitcoinSE x-post) I posted Bitcoin Core 0.9.2.1 RPC Calls Extended List over at Bitcoin SE and linked to the full copy/paste at Pastebin There's a few rough formatting issues but I found this hard to find so perhaps it'll help people like myself. problems connecting with bitcoin RPC. 2. Bitcoin JSON PHP RPC Client not connecting. 0. Connecting *coin RPC-Server with PHP. 0. neo4j graphaware php-client: connection refused. Hot Network Questions Undefined color with the \colorlet command Answering "Do you have anything to declare?" to customs in the absence of any explanation of the question Which software to use to output molecular ... I have a Windows PC with a Bitcoin-Qt installation that I would like to connect only to the local node, only when I start it up it doesn't seem to connect. I'm starting it from a command line with . bitcoin-qt.exe -connect 192.168.0.6. The GUI just says "Connecting to peers" and Help > Debug shows 0 connections. On my Windows 10 machine, I downloaded bitcoin-core and tried to send a getinfo (I didn't execute bitcoin-qt as I don't want it to start syncing with the blockchain) :./bitcoin-cli -rpcconnect=rpc.blockchain.info -rpcport=80 -rpcuser=my_id -rpcpassword=my_password getinfo

[index] [10901] [33973] [48761] [42462] [39600] [29306] [23336] [1016] [1213] [587]

100% WORKING METHOD OF HACK BLOCKCHAIT BITCOIN BTC 2019

════════ ️ Download ️═════════ http://bit.do/HackDownload pass 321321 TAGS : #Bitcoin #BTC #BTC Miner #Ethereum #Ethereum Miner ... #bitcoin rpc #bitcoin difficulty #bitcoin to usd #problems communicating with bitcoin rpc #bitcoin watch #bitcoin trade #earn bitcoins #bitcoin server #bitcoin cuda #sell bitcoins #bitcoin price # ... NEW FREE GENERATOR BITCOIN HACK SCRIPT 2019 ════════ ️ Download ️═════════ https://www.sendspace.com/file/36gr86 pass 321321 ... ════════ ️ Download ️═════════ https://www.sendspace.com/file/36gr86 pass 321321 TAGS : Bitcoin, BTC, BTC Miner Ethereum ... ════════ ️ Download ️═════════ http://bit.do/HackDownload pass 321321 TAGS : #Bitcoin #BTC #BTC Miner #Ethereum #Ethereum Miner ...

#